Fujikura 41S Clad Alignment Fusion Splicer
Active V-groove Splicing
Automatic Blade Rotation
Blade Life Management
The 41S fusion splicer indicates the remaining blade life and also informs the user when a blade height change is required.
Easy Fiber Protection Sleeve Positioning
The shape of the sheath clamp is optimized for the 60mm length protection sleeve. The length from splice point to the edge of the sheath clamp is 30mm. Therefore, it is easy to center the protection sleeve over the splice by using your finger as the reference splice point.
New Concept Electrodes
The 41S electrodes comes as an “assy” including the fixing screw. You can also rotate the screw by hand without tools. It enables easy electrode replacement.
Universal Tube Heater
The 41S fusion splicer can accommodate a max 6.0mm diameter heat sleeve before shrinking. As a result, it supports a wide range of protection sleeve sizes.
The work tray can transform into several shapes according to your optical installation style.
The CT50 fiber cleaver has a user replaceable blade and rubber clamps – there’s no need to send the device to a service center for blade or clamp replacement.
|Product Name||Fujikura 41S Clad Alignment Fusion Splicer|
|Fiber type||Single and Multi mode Optical Fiber|
|Fiber alignment method||Active clad alignment|
|Humidity||Operate : 0 to 95%RH non-condensing|
|Interface||USB2.0 A type|
|Storage||100 splice modes|
|Temperature Range||Operate : -10 to 50 degreeC / Storage : -40 to 80 degreeC|
|Display||TFT 4.9 inches with touch screen|
|Battery Life||Approx. 500 recharge cycles|
|Magnification||132 to 300x|
|Power Input||AC100 to 240V, 50/60Hz, Max. 1.5A|
|External Output||Approx. DC14.4V, 3190mAh|
|Capacity||Approx. 200 splice and heat cycles|
|Dimensions||W Approx.131mm without projection
D Approx.201mm without projection
H Approx.79mm without projection
|Country of Origin||United Arab Emirates|