PRODUCT OVERVIEW

Thermaltake Water 3.0 Riing RGB 360

Designed to meet the demands of enthusiasts, Thermaltake releases the latest Water 3.0 Riing RGB Series, an RGB all-in-one liquid cooler with triple 120mm powerful high static pressure fans and a smart fan controller. Choose from: 240mm and 360mm highly-efficient radiators to control any escalating CPU temperatures. The new All-In-One LCS Water 3.0 Riing RGB is designed to exceed user expectations.

Smart Fan Controller

A self-contained fan controller can switch between 5 LED modes including solid colors of red, blue, white, green or disable and cycle through 256 colors. Play/Pause functions allow users to cycle colors (color remains unchanged even after the PC has been turned off or rebooted) with speed control options to reduce noise even more all from your fingertips.

High-Efficiency Radiator

Special designed 360mm large surface radiator not only doubles the cooling surface but also supports up to 6 x 120mm fans for additional heat dissipation.

Durable Sleeved Cable and High-Performance Waterblock

The high-performance copper base plate accelerates the heat conductivity. Additionally, the pre-refilled coolant reduces any stress from a liquid replenishment hassle.
Cable sleeve design delivers the best durability and prevents the tubing surface from any damages and scratches.

High-Reliability Pump

The high quality and reliable pump enable the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore no refill is either needed or required.

Simple Setup

Featuring the latest cooling performance, Thermaltake Water 3.0 Riing RGB Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

• To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
• Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
• It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
• Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

• It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
• Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
• DO NOT let the pump run dry when there is no liquid entering the pump turn off your power immediately
• Fill the reservoir to the top as it will prevent air from going into the pump
• If necessary tilt the system slightly from side to side to bleed the air out of the loop.
• Place some paper towels under fittings and joining points to test for leaks.
• Run the loop with the fill port opens for about 24 hours to completely bleed the air out of the loop.