Tripp Lite SmartPro 230V 1.05kVA 650W Line-Interactive Sine Wave UPS, Tower
The Tripp Lite SMX1050SLT SmartPro 230V 1.05kVA 650W Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up point-of-sale applications, VoIP systems and small business networks, the SMX1050SLT switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.
Automatic voltage regulation (AVR) maintains selectable 220V, 230V or 240V nominal output over an input range of 174V–266V (220V), 182V–278V (230V) or 190V–290V (240V) without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 350-joule surge suppression rating protects your equipment from harmful power surges. Featuring eight C13 outlets and a C14 inlet that accepts a user-supplied AC power cord, the SMX1050SLT has an internal battery that provides 20 minutes of support at half load and seven minutes at full load. Front-panel LEDs indicate line power, voltage regulation, load level and battery status. An alarm sounds to indicate power failure or overload.
With Tripp Lite’s downloadable PowerAlert® software, the SMX1050SLT enables safe unattended system shutdown and file saves in case of a prolonged power failure. Adding an optional network management card permits remote management of the UPS, including reboots and activity logs.
Tripp Lite SMX1050SLT SmartPro Features,
Protects Mission-Critical Equipment
- 8 C13 outlets.
- 350-joule surge suppression rating.
- Audible alarm signals loss of utility power or overload.
- C14 inlet accepts user-supplied AC power cord with country-specific plug.
- Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks.
Reliable Battery Backup
- Supports half load up to 20 min. and full load up to 7 min.
- Internal batteries designed for hot-swap field replacement.
- Cold-start capability enables turn-on in battery mode during blackouts.
- Automatic Voltage Regulation (AVR)
- Maintains selectable nominal output without using battery power.
- Corrects brownouts and overvoltages from 174V–266V (220V), 182V–278V (230V) or 190V–290V (240V).
| Product Name | Tripp Lite SmartPro 230V 1.05kVA 650W Line-Interactive Sine Wave UPS, Tower |
|---|---|
| Output Power | 1.05kVA/ 1050VA |
| Output Voltage | 240 Volts |
| Input Frequency | 50 / 60 Hz |
| Input Voltage Range | 220V AC, 230V AC, 240V AC |
| Interface Ports | DB-9 RS-232, SNMP/Web interface, USB |
| Control Panel | 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection, 9 LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter fo |
| Battery Type | Hot-swappable, user replaceable batteries |
| Recharge Time | Less than 8 hours from 10% to 90% (typical, full load discharge) |
| Audible Alarm | Audible alarm indicates power failure and overload conditions |
| Cord Length | - |
| Approvals | CE, Tested to GOST, Tested to SASO, FCC Part 15 Category B (EM), CE / IEC 62040 |
| Dimensions | 25.91 x 17.27 x 33.53 |
| Shipping Dimensions | 35.56 x 24.89 x 46.99 |
| Weight | 7.41 Kg |
| Shipping Weight | 17.500 |
| Manufacturer | Tripp Lite By Eaton |
| Color | Black |
